TG-200 Single-arm horizontal casing winding machine

Mechanical Characteristics：

The machine body is made of advanced castings of high quality resin sand, and the base is welded         seamlessly by steel plate, with large bearing capacity, noise and vibration reduction, and increased         stability of the machine. Use the imported rails and screws with high machine positioning accuracy. Each step of spindle assembly has to be subject to the rigorous quality control to achieve higher speed, lower noise, longer life, easy replacement of models with calling appropriate procedures and replacing fixture only.

Main Configuration：

1.Use of  brand motors,  screws, rails.

2.Use of imported cylinder and solenoid valve.

3.Use of high-performance DSP multi-axis motion controller.

4.Spindles use Japan NSK high-speed bearings, and GATES belt.

Main Features：

1. The main shaft and all dimensions are equipped with AC servo motors, with fast and accurate operating and positioning speeds for each axis. Terminal winding can be achieved in multiple directions.

2. Replacement of winding varieties: Simply call the pre programmed program in the machine and replace the fixture.

3. Thread handling method: a: Pull or scissor cut; b: The scrap wire falls into the scrap wire slot.

4. Programming method: Touch screen programming, providing a human-computer interactive visual education system, achieving a WYSIWYG programming effect.

5. This model is automatic feeding.